Description Of The Use Of Small Universal Grinder
1. WF series of dust crusher are added hopper, the bottom of the bucket outside the feeding adjustment Section inserts, according to the material's fragile degree and crushing fineness, adjust the slotting board should be adjusted to the drop size of the material is indeed position and lock.
2. Under the machine there is a material outlet, if the material with the wind discharge caused a slight spray phenomenon, should be in the material add pass mouth cloth bag tie bar to let the material through the mouth cloth bag slowly overflow.
3. In the first time before the boot should be carried out an air transfer test, before commissioning should check the machine Site to confirm whether the machine is eligible.
4. The machine has water-cooled type, use should be used to avoid damaging bearings.
